Peel Strength / Seal Strength Tester Digital

The SK Adhesion Strength Tester is used to quantify the permanence of adhesion or peel ability of self- adhesive pressure sensitive materials. Peel adhesion is defined as the force required for removing a pressure sensitive coated material, which has been applied to a standard test plate under specified conditions, from the plate at a specified angle and speed. SK Adhesion Strength Tester is strictly manufactured as per ASTM standards and is highly recommended for use in the plastic industry.

The SK Adhesion Strength Tester is used to quantify the permanence of adhesion or peel ability of self- adhesive pressure sensitive materials. Peel adhesion is defined as the force required for removing a pressure sensitive coated material, which has been applied to a standard test plate under specified conditions, from the plate at a specified angle and speed. SK Adhesion Strength Tester is strictly manufactured as per ASTM standards and is highly recommended for use in the plastic industry.

SK Adhesion Strength Tester is capable of peeling a laminate through an angle of 180 ° with a jaw separation rate of 300 mm per minute with an accuracy of +/- 2%.

SK offers a table top compact model. A peak hold for maximum load in memory is provided with unique self calibration facility.

A printout facility can also be included (optional). Further Peel Adhesion Fixture (90 °) can be provided for evaluating the adhesive response of different laminates.

The SK Adhesion Strength Tester is built on a rigid metallic base plate and finished in Autumn Gray & Blue combination painting, the instrument has a bright chrome / zinc plating to give it a corrosion resistant finish. The tester comes complete with Instruction Manual; Electrical Wiring Diagram & Calibration Certificate traceable to NABL approved Labs.

 

Capacity: 20 kgf. (other capacities available on request)
Test Speed: 300 mm per minute
Least Count: 2 gm
Approximate Weight: Nett weight 90 Kg, after packing gross weight 120 kg
Dimensions: (Length x width x Height) 61cm x 51cm x 124 cm
Electrical Requirements: Single Phase 220 Volt AC
Printout or AC Speed Drive – Optional
Standards – ASTM D429 – 14