pH/mV/ORP/Conductivity/TDS/Salinity/Resistivity – (LCD Display)

SK’s TDS meter is an all in one solution which is used to measure the TDS i.e. concentration of total dissolved solids of the solution at different modes i.e. pH mode, mV mode, ORP mode, TDS mode, conductivity mode, Salinity mode, Resistivity mode,C mode, etc. The instrument offers reliable and accurate test results.

SK’s TDS meter is an all in one solution which is used to measure the TDS i.e. concentration of total dissolved solids of the solution at different modes i.e. pH mode, mV mode, ORP mode, TDS mode, conductivity mode, Salinity mode, Resistivity mode,C mode, etc. The instrument offers reliable and accurate test results.

 

pH Mode 

  • Range: -2.000~ 20.000pH
  • Accuracy: +/-0.002pH
  • Resolution: 0.1, 0.01, 0.001pH
  • Calibration Points: 1 to 5 points, USA, DIN, NIST Standards.
  • Temperature Compensation: 0~100oC, 32~212oF, Manual or Automatic

mV mode 

  • Range: -1999.9~1999.9 mV
  • Accuracy: +/-0.2 mV
  • Resolution: 0.1, 1 mV
  • Calibration Points: 1 points (Only for Relative mV mode)
  • Calibration Range +/-200mV

Conductivity                       

  • Range 0~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm
  • Accuracy ±0.5% F.S
  • Calibration Points 1 to 5 points
  • Calibration Solutions – 10µS/cm, 84µS/cm, 1413µS/cm, 12.88mS/cm, 111.8mS/cm
  • Temperature Compensation – 0~100°C, 32~212°F, Manual or Automatic
  • Temperature Coefficient – 0.0~10.0%/°C
  • Compensation Modes Linear or Pure Water
  • Cell Constant K=0.1, 1, 10
  • Normalization Temperature – 20 or 25°C 

TDS           

  • Range – 0~10ppt (Max. 20ppt, depending on factor setting)
  • Accuracy – ±1% F.S
  • TDS Factor – 0.1~1.0 (Default 0.5)                       

Salinity 

  • Range – 0~10ppt (Max. 80ppt)
  • Accuracy – ±1% F.S
  • Measurement Modes – Seawater or Practical Salinity

Resistivity                       

  • Range – 0~100MΩ
  • Accuracy – ±1% F.S
  • Resolution – 0.01, 0.1, 1 

Temperature                       

  • Range – 0~105°C, 32~221°F
  • Accuracy – ±0.5°C, ±0.9°F
  • Resolution – 0.1°C
  • Calibration Points – 1 point
  • Calibration Range – Measured value ±10°C

Other Specifications

  • Hold Function – Manual or Automatic
  • Stability Conditions – Low or High
  • Calibration Due – 0 to 31 days
  • Power Off – Manual or Automatic (10, 20, 30 minutes)
  • Reset Function – Yes
  • Memory – Stores up to 500 data sets
  • Output – USB Communication Interface
  • Connector – BNC, 6-pin Mini Plug
  • Display – LCD
  • Power Requirements – DC5V, using AC adapters, 220VAC/50Hz
  • Dimensions – 210(L)×188(W)×60(H)mm Weight – 1.5kg